Detect up to five level limits with one probe
Flexible instrumentation (compact/separate)
No moving parts
Specs at a glance
Function Level switch for multiple point detection Product liquids as of 10 µS/cm Approval ATEX II 2G EEx ia Measuring points up to 4 measuring points with 5 rods or ropes Product temperature –40 to +100 °C (–40 to + 212 °F) Process pressure –1 to +10 bar (–14.5 to +145 psi)
Liquipoint T FTW31
Product / Version Price / pcs. in KRW Order code Electronics; Output Sensing Point Probe Length 1 to 3 4 to 10 11+ FEW52; PNP 10.8-45VDC / FEW54; relay 20-253VAC; 20-55VDC / FEW58; NAMUR 2x rod, 316L 72inch L, 316L 223,700 212,515 201,330 FTW31-A2A2EBxA 36inch L, 316L 242,300 230,185 218,070 FTW31-A2A2LBxA 500mm L, 316L 223,700 212,515 201,330 FTW31-A2A2HBxA 1500mm L, 316L 237,600 225,720 213,840 FTW31-A2A2IBxA 3x rod, 316L 72inch L, 316L 254,900 242,155 229,410 FTW31-A2A3EBxA 36inch L, 316L 273,500 259,825 246,150 FTW31-A2A3LBxA 500mm L, 316L 254,900 242,155 229,410 FTW31-A2A3HBxA 1500mm L, 316L 268,800 255,360 241,920 FTW31-A2A3IBxA Separate instrumentation 5x rod, 316L 72inch L, 316L 175,500 166,725 157,950 FTW31-A2A5EB0A 500mm L, 316L 175,500 166,725 157,950 FTW31-A2A5HB0A 1500mm L, 316L 189,400 179,930 170,460 FTW31-A2A5IB0APlease notice that FTW31 does not come with CSA approval!
Liquipoint T FTW32
Product / Version Price / pcs. in KRW Order code Electronics; Output Sensing Point Probe Length 1 to 3 4 to 10 11+ FEW52; PNP 10.8-45VDC / FEW54; relay 20-253VAC; 20-55VDC / FEW58; NAMUR 2x rope, 316Ti 180inch L 245,300 233,035 220,770 FTW32-A2D2EBxA 360inch L 328,800 312,360 295,920 FTW32-A2D2FBxA 5000mm L 287,000 272,650 258,300 FTW32-A2D2CBxA 10000mm L 328,800 312,360 295,920 FTW32-A2D2DBxA 3x rope, 316Ti 180inch L 277,000 263,150 249,300 FTW32-A2D3EBxA 360inch L 360,500 342,475 324,450 FTW32-A2D3FBxA 5000mm L 318,700 302,765 286,830 FTW32-A2D3CBxA 10000mm L 360,500 342,475 324,450 FTW32-A2D3DBxAPlease notice that FTW32 does not come with a CSA approval!
Prices valid until 31.08.2018 in EUR per unit (not including shipping and applicable sales tax). See
Endress+Hauser Terms and Conditions
Is this Liquipoint level switch not the perfect match for your application?
Liquipoint T sensors are used in conductive liquids for determining point levels. Depending on the number of measuring points, measuring tasks such as overspill protection, dry running protection, two-point control of pumps or multiple point detection can be implemented within an existing process connection.
An alternating voltage exists between the rod probes in an empty tank. As soon as the conductive liquid in the tank creates a connection between the ground rod probe and the maximum rod probe, for example, a measurable current flows and the Liquipoint T switches.
By using alternating voltage, corrosion of the probe ends and electroytic destruction of the product is avoided. As the system is designed as a closed potential-free circuit between the probe rods and the electronics, the materials used in the tank walls is unimportant and there is no danger if the probe rods are touched during operation.
Probes with integrated electronic insert (compact instrument version)
Probes without integrated electronic insert (separate instrument version)
Compact version: two/three (Always ∆S-mode - only three rod-/rope versions) rods or ropes;
Separate version (With integrated line monitoring - in combination with level limit switch FTW325): two/three/five rods or ropes
Rod: 100 to 4000 mm (4" to 157");
rope: 250 to 15000 mm (10" to 590")
Minimum conductivity ≥10 µS/cm Cable specification Use standard cable (25 Ω per core)Operating conditions Medium temp. –40 to +100 °C (–40 to +212 °F) Ambient temp. –40 to +70 °C (–40 to +158 °F) Pressure –1 to +10 bar (–14.5 to +145 psi) Ingress Protection IP 66 Process connection G1½"Material Electrodes Rods: 1.4404 (316L)/insulation: PP; ropes: 1.4571 (316TI)/insulation: FEP; weight: 1.4435 (316L) Process connection PPS Housing F16
For compact instrument version;
For separate instrument version;
hat: PBTApprovals (Compact instrument version)
Ex approval ATEX II 2G EEx ia IIC T6 with FEW58 WHG approval WHG Z-65.40-360 (DIBt)Approvals (Separate instrument version) Ex approval ATEX II 2G EEx ia IIC T6
Dimensions (in mm)
Compact-instrument version with electronic insert
Separate instrument version without electronic insert
Electrical connection – Probes with electronic insert
(compact instrument version)Electronic insert FEW52
Supply voltage U = 10.8 to 45 V DC Current consumption Max. 25 mA Load connection Open collector; PNP Switching voltage max. 45 V Connectable load
Temporary (max. 1 sec): max. 2 A
Continuous: max. 200 mA;
Protected against reverse polarity YesElectronic insert FEW54 Supply voltage
20 to 55 V DC or
20 to 253 V AC, 50/60 Hz
Current consumption 60 mA Peak inrush current Max. 2 A, max. 400 μs Pulse frequency Approx. 1.5 s Output Two potential-free changeover contacts (DPDT) Contact load capacity U~ max. 253 V, I~ max. 4 A, U = 30 V/4 A; 150 V/ 0.2 A Power consumption < 2.0 WElectronic insert FEW58 Supply voltage see Technical data of connected isolating amplifier according to IEC 60947-5-6 (NAMUR). Use with a separate contactor according to IEC 60947-5-6 (NAMUR); output signal leap of high to low electricity on limit (H-L-flank). Two-wire signal transfer H-L-edge 2.2 to 6.5 mA / f0.4 to 1.0 mA Output signal of damaged sensor <1.0 mA On access to a multiplexer the cycle time is to adjust on min. 2 sec.
Electrical connection – Probes without integrated electronic insert
More documents for FTW31More documents for FTW32