iTHERM CompactLine TM311 EN
IOLINK

Compact thermometer with Pt100 or 4 to 20 mA/ IO-Link output

iTHERM CompactLine TM311

from €70,-
Need help?

Informacja - Zamówienia
+48 71 773 00 50

    • Small, compact design entirely made of stainless steel

    • Extremely short response time

    • Highest accuracy even with short immersion lengths

    Specs at a glance

    Measuring range –50 to +200 °C (–58 to +392 °F)
    Pressure range up to 50 bar (725 psi)
    Response time Pt100: 5 s (T63), 11 s (T90); iTHERM TipSens: 1.0 s (T63), 2.0 s (T90)
    Predecessors TMR31 and TMR35

    iTHERM CompactLine TM311 - Threaded connection - PT100

    Product / VersionPrice / pcs. in EUROrder code
    OutputDesign; Diameter InsertProcess Connection1 to 34 to 1011+
    Pt100, 4-wire class A (IEC 60751)W/o thermowell, direct contact; 6mmG1/2 male thread ISO228, 316L / G1/4 male thread ISO228, 316L96,-86,-78,- TM311-AAA0BxxBBX1A2
    Select options
    With thermowell; 3mmCompression fitting G1/2 male thread, TK40-BADA3C, 316L244,-220,-200,- TM311-AAA2BG7BBX1B2
    Select options
    Installation in existing thermowell; 3mmNot needed138,-124,-113,- TM311-AAA1AA0ABX1B2
    Select options

    iTHERM CompactLine TM311 - Threaded connection - 4..20mA

    Product / VersionPrice / pcs. in EUROrder code
    OutputDesign; Diameter InsertProcess Connection1 to 34 to 1011+
    IO Link/4-20mA, variable measuring range, as specifiedW/o thermowell, direct contact; 6mmG1/2 male thread ISO228, 316L / G1/4 male thread ISO228, 316L136,-122,-111,- TM311-AAB0BxxBBX1A2
    Select options
    With thermowell; 3mmCompression fitting G1/2 male thread, TK40-BADA3C, 316L284,-256,-233,- TM311-AAB2BG7BBX1B2
    Select options
    Installation in existing thermowell; 3mmNot needed178,-160,-146,- TM311-AAB1AA0ABX1B2
    Select options

    iTHERM CompactLine TM311 - Hygienic connection - PT100

    Product / VersionPrice / pcs. in EUROrder code
    Design; Diameter InsertProcess Connection1 to 34 to 1011+
    W/o thermowell, direct contact; 6mmMicroclamp, DN18 (0.75") / Tri-clamp, DN18 (0.75") / Clamp ISO2852, DN12 - 21.3 / Clamp > NA Connect ISO2852, DN25 - 38 (1-1.5") / Clamp > NA Connect ISO2852, DN40 - 51 (2")85,-77,-70,- TM311-AAA0BxxBBX1A2
    Select options
    Weld-in adapter cylindrical, D 30x40mm / Weld-in adapter cylindrical, D 12x40mm / Weld-in adapter spherical-cylindrical, D 30x40mm / Weld-in adapter spherical, D 25mm96,-86,-78,- TM311-AAA0BxxBBX1A2
    Select options
    Dairy fitting DIN11851, DN25 / Dairy fitting DIN11851, DN32 / Dairy fitting DIN11851, DN40 / Dairy fitting DIN11851, DN50122,-110,-100,- TM311-AAA0BxxBBX1A2
    Select options
    D45 process adapter / APV Inline, DN50122,-110,-100,- TM311-AAA0BxxBBX1A2
    Select options
    Varivent type B, D 31mm / Varivent type F, D 50mm / Varivent type N, D 68mm122,-110,-100,- TM311-AAA0BxxBBX1A2
    Select options
    90,-81,-74,- TM311-AAA0BH2BBX1A2
    Select options
    With thermowell; 3mmMicroclamp, DN18 (0.75") / Tri-clamp, DN18 (0.75") / Clamp ISO2852, DN12 - 21.3 / Clamp > NA Connect ISO2852, DN25 - 38 (1-1.5") / Clamp > NA Connect ISO2852, DN40 - 51 (2")133,-120,-109,- TM311-AAA2BxxBBX1A2
    Select options
    Weld-in adapter cylindrical, D 30x40mm / Weld-in adapter cylindrical, D 12x40mm / Weld-in adapter spherical-cylindrical, D 30x40mm / Weld-in adapter spherical, D 25mm143,-129,-118,- TM311-AAA2BxxBBX1A2
    Select options
    Dairy fitting DIN11851, DN25 / Dairy fitting DIN11851, DN32 / Dairy fitting DIN11851, DN40170,-153,-139,- TM311-AAA2BxxBBX1A2
    Select options
    218,-196,-178,- TM311-AAA2BA1BBX1A2+CA
    Select options
    Tee thermowell, DIN11865-A, DN20 PN25 / Tee thermowell, DIN11865-A, DN32 PN25 / Tee thermowell, DIN11865-A, DN10 PN25 / Tee thermowell, DIN11865-A, DN15 PN25 / Tee thermowell, DIN11865-A, DN25 PN25364,-327,-298,- TM311-AAA2BxxBBX1A2+CA
    Select options
    Elbow thermowell, DIN11865-A, DN20 PN25 / Elbow thermowell, DIN11865-A, DN32 PN25 / Elbow thermowell, DIN11865-A, DN10 PN25 / Elbow thermowell, DIN11865-A, DN15 PN25 / Elbow thermowell, DIN11865-A, DN25 PN25398,-358,-327,- TM311-AAA2BxxBBX1A2+CA
    Select options

    iTHERM CompactLine TM311 - Hygienic connection - 4..20m A

    Product / VersionPrice / pcs. in EUROrder code
    Design; Diameter InsertProcess Connection1 to 34 to 1011+
    W/o thermowell, direct contact; 6mmMicroclamp, DN18 (0.75") / Tri-clamp, DN18 (0.75") / Clamp ISO2852, DN12 - 21.3 / Clamp > NA Connect ISO2852, DN25 - 38 (1-1.5") / Clamp > NA Connect ISO2852, DN40 - 51 (2")125,-112,-102,- TM311-AAB0BxxBBX1A2
    Select options
    Weld-in adapter cylindrical, D 30x40mm / Weld-in adapter cylindrical, D 12x40mm / Weld-in adapter spherical-cylindrical, D 30x40mm / Weld-in adapter spherical, D 25mm136,-122,-111,- TM311-AAB0BxxBBX1A2
    Select options
    Dairy fitting DIN11851, DN25 / Dairy fitting DIN11851, DN32 / Dairy fitting DIN11851, DN40162,-146,-133,- TM311-AAB0BxxBBX1A2
    Select options
    D45 process adapter / APV Inline, DN50162,-146,-133,- TM311-AAB0BxxBBX1A2
    Select options
    Varivent type B, D 31mm / Varivent type F, D 50mm / Varivent type N, D 68mm162,-146,-133,- TM311-AAB0BxxBBX1A2
    Select options
    130,-117,-107,- TM311-AAB0BH2BBX1A2
    Select options
    With thermowell; 3mmMicroclamp, DN18 (0.75") / Tri-clamp, DN18 (0.75") / Clamp ISO2852, DN12 - 21.3 / Clamp > NA Connect ISO2852, DN25 - 38 (1-1.5") / Clamp > NA Connect ISO2852, DN40 - 51 (2")173,-155,-142,- TM311-AAB2BxxBBX1A2
    Select options
    Weld-in adapter cylindrical, D 30x40mm / Weld-in adapter cylindrical, D 12x40mm / Weld-in adapter spherical-cylindrical, D 30x40mm / Weld-in adapter spherical, D 25mm183,-165,-150,- TM311-AAB2BxxBBX1A2
    Select options
    Dairy fitting DIN11851, DN25 / Dairy fitting DIN11851, DN32 / Dairy fitting DIN11851, DN40210,-189,-172,- TM311-AAB2BxxBBX1A2
    Select options
    257,-232,-211,- TM311-AAB2BA1BBX1A2+CA
    Select options
    Tee thermowell, DIN11865-A, DN20 PN25 / Tee thermowell, DIN11865-A, DN32 PN25 / Tee thermowell, DIN11865-A, DN10 PN25 / Tee thermowell, DIN11865-A, DN15 PN25 / Tee thermowell, DIN11865-A, DN25 PN25404,-363,-331,- TM311-AAB2BxxBBX1A2+CA
    Select options
    Elbow thermowell, DIN11865-A, DN20 PN25 / Elbow thermowell, DIN11865-A, DN32 PN25 / Elbow thermowell, DIN11865-A, DN10 PN25 / Elbow thermowell, DIN11865-A, DN15 PN25 / Elbow thermowell, DIN11865-A, DN25 PN25438,-394,-359,- TM311-AAB2BxxBBX1A2+CA
    Select options

    Prices valid until 30.06.2020 in EUR per unit (not including shipping and applicable sales tax). See
    Endress+Hauser Terms and Conditions
    The transaction will be settled with a VAT invoice in PLN after conversion according to the EUR exchange sell rate at the National Bank of Poland on the day of issuing the VAT invoice.

    People who bought this also watched

    iTHERM ModuLine TM101
    iTHERM ModuLine TM101 >>>

    iTHERM ModuLine TM121
    iTHERM ModuLine TM121 >>>

    iTHERM TM401
    iTHERM TM401 >>>

    iTEMP TMT127 / 187 and 128 / 188
    iTEMP TMT127 / 187 and 128 / 188 >>>

    iTEMP TMT80
    iTEMP TMT80 >>>

  • Application

    iTHERM CompactLine TM311 is developed for universal use in hygienic and aseptic applications in the food & beverages and pharmaceutical industries, and for optimum standardization for machine and skid builders.

    Function

    The compact thermometer measures the process temperature with a Pt100 sensor element (class A, 4-wire). An optional built-in transmitter converts the Pt100 input signal. The device with integrated electronics automatically detects the type of communication (IO-Link or 4 to 20 mA).

    Application example

    iTHERM CompactLine TM311 - Application example

    The immersion length of the compact thermometer can considerably influence the accuracy. If the immersion length is too short, measurement errors can occur as a result of heat conduction via the process connection and the vessel wall.
    If installing in a pipe, the immersion length should ideally correspond to half of the pipe diameter.

    Installation possibilities: pipes, tanks or other plant components.

  • Technical data

    Input
    Measuring range – Pt100 (TF) basic: –50 to +150 °C (–58 to +302 °F)
    – TipSens: –50 to +200 °C (–58 to +392 °F)
    Output
    Output signal – Sensor: Pt100, 4-wire connection, class A
    – Analog: 4 to 20 mA; variable measuring range
    – Digital: C/Q (IO-Link or switch output)
    Switching capacity – 1 × PNP switch output
    – Switch state ON Ia ≤ 200 mA; switch state OFF Ia ≤ 10 μA
    – Voltage drop PNP ≤ 2 V
    Switch output Response time ≤ 100 ms
    Damping Configurable sensor input damping 0 to 120 s
    Switch-on delay 2 s
    Power supply
    Supply voltage IO-Link/4 to 20 mA: Ub = 10 to 30 VDC, protected against reverse polarity
    Performance characteristics
    Reference operating conditions – Adjustment temperature (ice bath): 0 °C (32 °F) for sensor
    – Ambient temperature range: 25 °C ± 3 °C(77 °F ± 5 °F) for electronics
    – Supply voltage: 24 VDC ± 10 %
    – Relative humidity: < 95 %
    Maximum measured error – Thermometer without electronics: 0.55 °C (0.99 °F)
    – Thermometer with electronics: ≤0.48 °C (0.86 °F)
    – Thermometer with electronics and sensor-transmitter-matching/increased accuracy: ≤0.14 °C (0.25 °F)
    Response time T63
    and T90    		 – 6 mm direct contact, straight tip Pt100 (TF) basic: T63 5 s; T90 11 s
    – 6 mm direct contact, straight tip iTHERM TipSens: T63 1 s; T90 2 s
    – 6 mm thermowell, straight tip (4.3 × 20 mm) iTHERM TipSens: T63 1 s; T90 3 s
    Electronics response time Max. 1 s
    Sensor current ≤ 1 mA
    Environment
    Ambient temperature range –40 to +85 °C (–40 to +185 °F)
    Storage temperature –40 to +85 °C (–40 to +185 °F)
    Climate class As per IEC/EN 60654-1, Class Dx
    Degree of protection As per IEC/EN 60529 IP69
    Shock and vibration resistance The thermometer meets the requirements of IEC 60751, which specifies shock and vibration resistance of 3 g in the 10 to 500 Hz range
    Electrical safety – Protection class III
    – Overvoltage category II
    – Pollution level 2

    Dimensions in mm (in)

    Without thermowell

    Without thermowell - Dimensions 1

    U – Variable immersion length, depending on the configuration

    A – Thermometer with spring-loaded cap-nut, G3/8" thread 3 mm for existing thermowell
    B – Thermometer with spring-loaded NPT½" male thread 3 mm for existing thermowell
    C – Thermometer without process connection for compression fitting, with extension neck
    D – Thermometer with G½" male thread
    E – Thermometer with G¼" male thread
    F– Thermometer with M14 male thread
    G – Thermometer with M18 male thread
    H – Thermometer with NPT½" male thread
    I – Thermometer with Microclamp, DN18 (0.75")
    J – Thermometer with Tri-Clamp, DN18 (0.75")

    Without thermowell - Dimensions 2

    Pay attention to the following equations when calculating the immersion length U for an existing thermowell:

    Version 1 (G3/8" cap-nut): U = U(thermowell) + T(thermowell) + 3 mm - B(thermowell)

    Version 2 (NPT½" male thread): U = U(thermowell) + T(thermowell) + 11 mm - B(thermowell)

    K – Thermometer with ISO2852 clamp for DN12 to 21.3, DN25 to 38, DN40 to 51
    L – Thermometer with milk pipe connection DIN11851 for DN25/DN32/DN40/DN50
    M – Thermometer with metal sealing system G½"
    N – Thermometer with G¾" male thread ISO228 for FTL31/33/20/50 Liquiphant adapter
    O – Thermometer with D45 process adapter
    P – Thermometer with APV in-line, DN50
    Q – Thermometer with Varivent type B, D 31 mm
    R – Thermometer with Varivent type F, D 50 mm and Varivent Typ N, D 68 mm
    S – Thermometer with SMS 1147, DN25/DN38/DN51

    With compression fitting

    With compression fitting - Dimensions 3

    Thermowell version as T-piece or elbow piece

    Thermowell version as T-piece or elbow piece - Dimensions 4

     

    V – Thermometer with TK40 compression fitting, cylindrical, Elastosil ferrule, ⌀ 25 mm, for weld-in
    W – Thermometer with thermowell as T-piece
    X – Thermometer with thermowell as elbow piece

    With thermowell diameter 6 mm (¹⁄₄ in)

    With thermowell diameter 6 mm (¹⁄₄ in) - Dimensions 5

    A1 – Thermometer with weld-in adapter, cylindrical, D 12 × 40 mm
    B1 – Thermometer with weld-in adapter, cylindrical, D 30 × 40 mm
    C1 – Thermometer with weld-in adapter, spherical-cylindrical, D 30 × 40 mm
    D1 – Thermometer with weld-in adapter, spherical, D 25 mm
    E1 – Thermometer with milk pipe connection DIN11851, DN25/DN32/DN40
    F1 – Thermometer with Microclamp, DN18 (0.75")

    Electrical connection

    iTHERM CompactLine TM311 - Electrical connection

    G1 - IO-Link operating mode

    1 – Pin 1 - power supply 15 to 30 VDC
    2 – Pin 2 - not used
    3 – Pin 3 - power supply 0 VDC
    4 – Pin 4 - C/Q (IO-Link or switch output)

     

    H1 - 4 to 20 mA operating mode

    1 – Pin 1 - power supply 10 to 30 VDC
    2 – Pin 2 - power supply 0 VDC
    3 – Pin 3 - not used
    4 – Pin 4 - not used

     

    I1 - Without electronics

    Pt100, 4-wire connection

  • More documents for TM311

  • IO-Link

    Besides its general benefits, summarized below, using IO-Link point-to-point communication with our temperature sensor TM311 allows:

    • Commissioning via software
    • Storage of the configuration
    • Use as simple temperature switch (1 Output)

     

    General benefits of IO-Link

    Digital measured values:

    • Faultless transmission (e.g. EMC caused)
    • No conversion, thus a higher total accuracy

     

    More data

    • Possibility to carry more values
    • Detailed fault information
    • Additional process information

     

    Central parameters storage

    • Possibility to load set up parameters from the master into a device
    • Configuration can be duplicated from one device to the next
    • Remote sensor maintenance