Compact thermometer with Pt100 or 4 to 20mA output

Temperature sensor with Pt100 or 4 to 20mA output

Easytemp TMR31

from €67,-
Need help?

Informacja - Zamówienia
+48 71 773 00 50

    • PC programmable transmitter with 4 to 20 mA output
      or Pt100 sensor

    • Fast response times without reduced tip

    • Selectable sensor length

    Specs at a glance

    Temperature range –50 to +200 °C (–58 to 392 °F)
    Accuracy <0.08 %, Pt100 class A
    Immersion length (diameter)

    40 to 600 mm (Ø 6 mm)

    (1.6 to 23.6" (Ø 0.24))

    Sensor response time <1.0 s (T50), <2.0 s (T90)
    Product / VersionPrice / pcs. in EUROrder code
    Output; Measuring RangeProcess Connection1 to 34 to 1011+
    4..20mA max.150°W/o, compr. fitting 316L, L=>100mm (3.94") insertion length compr. fitting, to order separately.125,-116,-110,- TMR31-A1XxAAAX1AAA
    4..20mA max 150°G1/2 male thread ISO228, 316L132,-123,-116,- TMR31-A1XxBBAX1AAA
    4..20mA max.200°W/o, compr. fitting 316L, L=>100mm (3.94") insertion length compr. fitting, to order separately.125,-116,-110,- TMR31-A1XBAAAX1AAA
    4..20mA max 200°G1/2 male thread ISO228, 316L132,-123,-116,- TMR31-A1XBBBAX1AAA
    Pt100, DIN class A, 4-wireW/o, compr. fitting 316L, L=>100mm (3.94") insertion length compr. fitting, to order separately.76,-71,-67,- TMR31-A11xAAAX1AAA
    G1/2 male thread ISO228, 316L83,-78,-73,- TMR31-A11xBBAX1AAA

    Accessories

    Product / VersionPrice / pcs. in EUROrder code
    Collar welding boss d6 PEEK + screw moveable with sealing taper, washer + pressure screw G1/2, material of wetted parts: 316L, PEEK, max. Prozessdruck: 10 bar (145 psi)46,32 51004751
    Collar welding boss d6 PEEK w/o screw moveable with sealing taper + washer, material of wetted parts: 316L, PEEK, max. process pressure: 10 bar (145 psi)24,46 51004752
    Compression Fitting TA50
    6mm; G1/2; PTFE
    56,44 TA50-HP
    Configuration kit TXU10- for PC-programmable devices. set-up programme+interface cable for PC with USB-Port. 4 pin plug+ReadWin2000+adapter M12125,52 TXU10-BA
    Cable M12x1 l=5m 5m cable 4x 0.34 mm2, molded PVC angled connector, M12x1 connector screw Cu Sn/Ni, IP67.9,56 51005148

    Prices valid until 30.06.2019 in EUR per unit (not including shipping and applicable sales tax). See
    Endress+Hauser Terms and Conditions
    The transaction will be settled with a VAT invoice in PLN after conversion according to the EUR exchange sell rate at the National Bank of Poland on the day of issuing the VAT invoice.

    Is this temperature sensor not the perfect match for your application?

    People who bought this also watched

  • Application

    The Easytemp TMR31 is a compact cost-effective thermometer that has been designed for use in all general applications across the process industries.

    Function

    The compact thermometer consists of a Pt100 class A sensor, (optional) transducer and housing with process connection. The TMR31 is available without a process connection so that it can be combined with a TW251 thermowell (with compression fitting) for insertion into a process. The built-in electronics can be programmed using a PC and TXU10-BA configuration kit to convert the Pt100 input signal into a temperature linear 4 to 20 mA signal. 

    Installation instructions

    Compact thermometer Easytemp TMR31 - INstalllation examples

    Pipe installation

     

    a) At angle sections, against the direction of flow

    b) In smaller pipes, turned against the direction of flow

    c) Perpendicular to the direction of flow

     

    L = Insertion length

  • Technical data

    Sensor
    Sensing element 1 × Pt100
    Tolerance Class A to IEC 751
    Process temperature

    –50 to +150 °C (–58 to 302 °F)

    (200 °C (392 °F) extension neck)

    Material 316L
    Diameter 6 mm (⌀ 0.24)
    Length 40 to 600 mm (1.6 to 23.6") selectable (please specify)
    Response time T50 = <1.0 s; T90 = <2.0 s
    Max. pressure 100 bar / 1500 psi (at 100 mm / 3.94" and 20 °C / 68 °F, depending on process conn.)
    Process connection
    Version G½", 316L; without (flange welding boss or compression fitting needed)
    Transmitter housing
    Degree of protection IP 66/67
    Electrical connection M12×1-plug-in connector
    Material 304
    Output characteristics
    Output signal With electronics 4 to 20 mA, 20 to 4 mA without electronics Pt100
    Signal on alarm
    • Under measuring range: linear decrease to 3.8 mA
    • Over measuring range: linear increase to 20.5 mA
    • Sensor break; Sensor short-circuit: ≤3.6 mA or 21.0 mA
    Load Max. (Upower supply –10 V )/0.023 A
    Induced current requirement ≤3.5 mA
    Current limitation ≤23 mA
    Switch-on delay 2 s
    Power supply
    Supply voltage Ub = 10 to 35 V DC
    Residual ripple Permitted residual ripple Uss ≤ 3 V at Ub ≥ 13 V, fmax = 1 kHz
    Accuracy
    Transmitter response time 1 s
    Reference operating conditions 0 °C (32 °F) (ice bath)
    Measuring error 0.1 K (0.18 °F) or 0.08 %
    Influence of supply voltage ≤ ±0.01 %/V deviation from 24 V
    Influence of ambient temperature (temperature drift)

    Td = ±(15 ppm/K × (full scale value of measuring range + 200) + 50 ppm/K × set measuring range) × ∆θ

    ∆θ = deviation of ambient temperature from the reference operating condition

    Long term stability ≤ 0.1 K/year or 0.05 %/year
    Influence of load ≤ ±0.02 %/100 Ω
    Operating conditions
    Ambient temperature –40 to +85 °C (–40 to 185 °F)
    Storage temperature –40 to +85 °C (–40 to 185 °F)
    Climate class As per EN 60 654-1, Class C
    Condensation Permitted
    Shock resistance 4 g/2 to 150 Hz as per IEC 60068-2-6
    EMC According to IEC 61326 Series and NAMUR NE21
    Approvals
    Approvals  DNV GL

    Dimensions (in mm)

    TMR31 without process connection

    Compact thermometer Easytemp TMR31 - Dimensions 1

    L1 = selectable length from 40 to 600 mm (1.6" to 23.6")

    * Version with extension neck add 35 mm (1.38")

    With G½" process connection

    Compact thermometer Easytemp TMR31 - Dimensions 2

    L1 = selectable length from 40 to 600 mm (1.6" to 23.6")

    * Version with extension neck add 35 mm (1.38")

    Electrical connection

    4 to 20 mA

    Compact thermometer Easytemp TMR31 : Electrical connection 1

    1 × Pt100

    Compact thermometer Easytemp TMR31 - Electrical connection 2

    a) red

    b) white

    Measuring range

    Code Measuring range

    AA

    4…20 mA, 0…+100 °C

    BA

    4…20 mA, 0…+150 °C

    CA

    4...20 mA, –50...+100 °C

    DA

    4...20 mA, –50...+150 °C

    EB

    4...20 mA, –50...+200 °C with extension neck
    FB 4...20 mA, 0...+200 °C with extension neck

    XB

    4...20 mA, measuring range selectable – please specify in  your order!

  • More documents for TMR31