Electromagnetic flowmeter Proline Promag 10D

Electromagnetic flowmeter

Proline Promag 10D

from kr5.573,-
Need help?

Info-Hotline
+46 8 555 116 00
+46 8 555 116 32

    • Easy, fast centering of the sensor
    • High degree of accuracy and measuring stability

    • No pressure loss, thus energy-saving

    Specs at a glance

    Function Continuous flow measurement
    Flow measurement up to 10 m/s (26.4 gal/min)
    Minimum conductivity ≥50 µS/cm
    Fluid temperature up to +60 °C (140 °F)
    Lining material Polyamide 
    Process pressure up to 16 bar (870 psi)

    Wafer versions (with mounting kit)

    Product / VersionPrice / pcs. in SEKOrder code
    Power Supply; DisplayDiameter1 to 34 to 1011+
    85-250VAC; 2-line, push buttonsDN256.494,-6.039,-5.714,- 10D25-xCGA1AA0A4AA+M1
    DN406.494,-6.039,-5.714,- 10D40-xCGA1AA0A4AA+M1
    DN506.494,-6.039,-5.714,- 10D50-xCGA1AA0A4AA+M1
    DN656.962,-6.474,-6.126,- 10D65-xCGA1AA0A4AA+M1
    DN806.962,-6.474,-6.126,- 10D80-xCGA1AA0A4AA+M1
    DN1007.381,-6.864,-6.495,- 10D1H-xCGA1AA0A4AA+M1
    20-28VAC / 11-40VDC; 2-line, push buttonsDN256.494,-6.039,-5.714,- 10D25-xCGA1AA0A5AA+M1
    DN406.494,-6.039,-5.714,- 10D40-xCGA1AA0A5AA+M1
    DN506.494,-6.039,-5.714,- 10D50-xCGA1AA0A5AA+M1
    DN656.962,-6.474,-6.126,- 10D65-xCGA1AA0A5AA+M1
    DN806.962,-6.474,-6.126,- 10D80-xCGA1AA0A5AA+M1
    DN1007.381,-6.864,-6.495,- 10D1H-xCGA1AA0A5AA+M1

    Version with threaded connections

    Product / VersionPrice / pcs. in SEKOrder code
    Power Supply; DisplayDiameter1 to 34 to 1011+
    85-250VAC; 2-line, push buttonsDN256.333,-5.890,-5.573,- 10D25-xUGA1AA0A4AA
    DN406.333,-5.890,-5.573,- 10D40-xUGA1AA0A4AA
    DN506.333,-5.890,-5.573,- 10D50-xUGA1AA0A4AA
    20-28VAC / 11-40VDC; 2-line, push buttonsDN256.333,-5.890,-5.573,- 10D25-xUGA1AA0A5AA
    DN406.333,-5.890,-5.573,- 10D40-xUGA1AA0A5AA
    DN506.333,-5.890,-5.573,- 10D50-xUGA1AA0A5AA

    Prices valid until 30.11.2017 in EUR per unit (not including shipping and applicable sales tax). See
    Endress+Hauser Terms and Conditions

  • Application

    Proline Promag 10D is an electromagnetic flowmeter for bidirectional measurement of conductive liquids. It is used for flow measurements in water or service water applications. Due to its easy installation and operation, its robust design and low price it can be used in applications where only limited principles could be used before. Drinking water approvals according to KTW/W270, WRAS BS 6920, ACS and NSF 61 are available.

    Function

    Following Faraday's law of magnetic induction, a voltage is induced in a conductor moving through a magnetic field. In the electromagnetic measuring principle, the flowing fluid is the moving conductor. By measuring the induced voltage, the flow velocity of the medium can be measured. The flow volume is calculated by means of the pipe cross-section area.

    Application example

    Electromagnetic flowmeter - Application example

    Proline Promag 10D for inflow measurement

  • Technical data

    Input
    Measuring ranges Typically v = 0.01 to 10 m/s (0.033 to 33 ft/s) with the specified accuracy
    Output signal
    Current output Active: 4 to 20 mA, RL < 700 Ω (for HART®: ≥ 250 Ω)
    Pulse/status output Passive: 30 V DC/250 mA; Open Collector
    Power supply
    Supply voltage

    85 to 250 V AC, 45 to 65 Hz;

    20 to 28 V AC, 45 to 65 Hz;

    11 to 40 V DC

    Power consumption (incl. sensor)

    85 to 250 V AC: < 12 VA;

    20 to 28 V AC: < 8 VA;

    11 to 40 V DC: < 6 W

    Accuracy
    Reference operating conditions as per DIN EN 29104 and VDI/VDE 2641
    Fluid temperature +28 °C ±2 K (+82 °F ± 2 K)
    Ambient temperature +22 °C ±2 K (+72 °F ± 2 K)
    Warm-up period 30 minutes
    Maximum measured error (Current output) ±0.5 % of full scale value add. typically ±5 μA
    Maximum measured error (Pulse output) ±0.5 % of reading ±2 mm/s
    Repeatability Max. ±0.2 % o.r. ±2 mm/s (o.r. = of reading)
    Inlet and outlet run
    If possible, install the sensor well clear of assemblies such as valves, T-pieces, elbows, etc.
    Inlet run ≥5 × DN
    Outlet run ≥2 × DN  
    Operating conditions: Environment
    Ambient temperature –20 to +60 °C (–4 to +140 °F)
    Storage temperature –20 to +60 °C (–4 to +140 °F)
    Degree of protection IP 67 (NEMA 4X) for transmitter and sensor
    Shock and vibration resistance Acceleration up to 2 g following IEC 600 68-2-6
    EMC As per IEC/EN 61326 and NAMUR Recommendation NE 21; Emission: to limit value for industry EN 55011
    Operating conditions: Process
    Medium temperature 0 to +60 °C (32 to 140 °F)
    Minimum conductivity ≥50 μS/cm
    Medium pressure PN16
    Pressure tightness Measuring tube: 0 mbar abs (0 psi abs) with a fluid temperature of ≤60 °C (≤140 °F)
    Material
    Ground disks 1.4301/304
    Sensor housing powder-coated die-cast aluminum
    Measuring tube polyamide, O-rings: EPDM
    Electrodes 1.4435/316L
    Fitted electrodes Two electrodes made of 1.4435/316L
    Mounting kit
    Included for wafer version 
    Contents Mounting bolts, seals, nuts, washers and flange seals
    Human interface
    Display elements Liquid crystal display: unilluminated, two-line, 16 characters per line
    Display Display (operating mode) preconfigured: volume flow and totalizer status
    Operating elements Local operation via three keys
    Remote operation Operation via HART® protocol and FieldCare
    Approvals
    Drinking water approval WRAS BS 6920

    Dimensions (in mm)

    Compact version Promag D as wafer version

    Electromagnetic flowmeter - Dimensions

    Installation according to operation instructions

    Compact version Promag D with threaded connection

    Installation according to operation instructions

    DN L A B C Weight
    EN (DIN)/JIS [mm] ANSI [inch] [mm (inch)] [mm (inch)] [mm (inch)] [mm (inch)] [kg (lbs)]
    25 1" 55 (2.17) 283 (11.1) 240 (9.45) 43 (1.69) 2.9 (6.4)
    40 1 ½" 69 (2.72) 303 (11.9) 251 (9.88) 52 (2.05) 3.5 (7.7)
    50 2" 83 (3.27) 324 (12.8) 262 (10.3) 62 (2.44) 4.3 (9.5)
    65 - 93 342 272 70 5.1 (11.3)
    80 3" 117 (4.61) 351 (13.8) 276 (10.9) 75 (2.95) 6.1 (13.5)
    100 4" 148 (5.83) 379 (14.9) 290 (11.4) 89 (3.50) 8.8 (19.4)

    Compact version Promag D with threaded connection

    Installation according to operation instructions

    DN E G H J Weight
    EN (DIN)/JIS [mm] ANSI [inch] [mm (inch)] [mm (inch)] [mm (inch)] [mm (inch)] [kg (lbs)]
    25 1" 110 (4.33) 240 (9.45) 43 (1.69) 283 (11.1) 2.9 (6.4)
    40 1 ½" 140 (5.51) 251 (9.88) 52 (2.05) 303 (11.9) 3.5 (7.7)
    50 2" 200 (7.87) 262 (10.3) 62 (2.44) 324 (12.8) 4.3 (9.5)

    Maximum measured error

    Max. measured error in % of reading

    Fluctuations in the supply voltage do not have any effect within the specified range.

     

    Pressure-temperature ratings

    Permitted process pressure

    Flow characteristic values [SI units (US units)]

    Diameter Recommended flow Factory settings
    [mm] [in.] min./max. full scale value
    (v ~ 0.3 or 10 m/s)
    Full scale value current output
    (v ~ 2.5 m/s)
    Pulse value
    (~ 2 Pulse/s)
    Low flow cut off
    (v ~ 0.04 m/s)
    25 1” 9 to 300 dm³/min
    (2.5 to 80 gal/min)
    75 dm³/min
    (18 gal/min)
    0.50 dm³
    (0.20 gal)
    1 dm³/min
    (0.25 gal/min)
    40 1 ½” 25 to 700 dm³/min
    (7 to 190 gal/min)
    200 dm³/min
    (50 gal/min)
    1.50 dm³
    (0.50 gal)
    3 dm³/min
    (0.75 gal/min)
    50 2” 35 to 1100 dm³/min
    (10 to 300 gal/min)
    300 dm³/min
    (75 gal/min)
    2.50 dm³
    (0.50 gal)
    5 dm³/min
    (1.25 gal/min)
    65 - 60 to 2000 dm³/min
    (16 to 500 gal/min)
    500 dm³/min
    (130 gal/min)
    5.00 dm³
    (1.00 gal)
    8 dm³/min
    (2 gal/min)
    80 3” 90 to 3000 dm³/min
    (24 to 800 gal/min)
    750 dm³/min
    (200 gal/min)
    5.00 dm³
    (2.00 gal)
    12 dm³/min
    (2.5 gal/min)
    100 4” 145 to 4700 dm³/min
    (40 to 1250 gal/min)
    1200 dm³/min
    (300 gal/min)
    10.00 dm³
    (2.00 gal)
    20 dm³/min
    (4 gal/min)

    Electrical connection

    Electromagnetic flowmeter - Connecting

    Connecting the transmitter, cable cross-section max. 2.5 mm²
    a    Electronics compartment cover
    b    Power supply cable
    c    Ground terminal for protective ground
    d    Terminal connector for power supply cable
    e    Signal cable
    f     Ground terminal for signal cable
    g    Terminal connector for signal cable
    h    Service connector
    i     Ground terminal for potential equalization


    Terminal No.:

    • 24 (+)/25 (–) = Pulse/status output
    • 26 (+)/27 (–) = HART® current output

    Functional values see "Output signal"

     

    • 1 (L1/L+)/2 (N/L–) = Power supply

    Functional values see "Supply voltage"

  • More documents for 10D