Universal graphic data manager

Ecograph T RSG35

from S$1,938.-

Need help?

Info-Hotline
+65-65668222

Electronic acquisition, display, recording, analysis, remote transmission and archiving of analog and
digital input signals
Web server for device configuration and display of measured value curves
4 mathematics channels

Save cycle	1 s to 1 h
Memory	128 MB internal memory, external SD card and USB stick
Inputs	Current, voltage, pulse/frequency and temperature
Interfaces	Ethernet, RS232/RS485 and USB, Modbus RTU/TCP slave
Installation depth	158 mm
Display	5.7" TFT screen

Prices valid until 30.11.2017 in SGD per unit (not including shipping and applicable sales tax). See
Endress+Hauser Terms and Conditions

Input values (universal input)

Number of inputs	0/4/8/12
Measured variables	Current: 0 to 5/20 mA, 4 to 20 mA; Voltage: 0 to 1/5/10 V, 1 to 5 V, ±150 mV, ±1 V, ±10 V, ±30 V; Resistance thermometer (RTD): Pt46, Pt50, Pt100, Pt500, Pt1 000, Cu50, Cu53, Cu100; Thermocouples: Type J, K, T, N, L, D, C, B, S, R; Pulse input: max. 13 kHz Frequency input: 0 to 10 kHz
Measured error	±0,1 % oMR (for current, voltage, resistance thermometer); ±0,01 % oMR (for frequency)
Scan rate	All channels within 100 ms
Resolution	24 Bit

Input values (digital input)

Number of inputs	6
Input frequency	max. 25 Hz
Pulse length	min. 20 ms
Input current	max. 2 mA
Input voltage	max. 30 V
Selectable functions	Control input, ON/OFF message, pulse counter, operating time, message+operating time. Functions of the control input: start recording, screen saver on, external memory cycle, lock setup, time synchronization, limit value monitoring on/off

Output values (auxiliary voltage output)

Output voltage	24 V DC ± 15 %
Output current	max. 250 mA, short-circuit proof

Output values (Relay output)

Alarm relay	1 alarm relay with changeover contact
Standard relay	5 relays with NO contact, e.g. for limit value messages (can be configured as NC contact).
Relay switching capacity	max. 3 A @ 250 V AC or 3 A @ 30 V DC

Power supply

Supply voltage	100 to 230 V AC (±10%) 50/60Hz; ±24 V AC/DC (–10% / +15%) 50/60Hz
Power consumption	100 to 230 V: max. 35 VA; 24 V: max. 24 VA

Connection data interface/communication

Standard	USB, Ethernet
Advanced options	Serial RS232/RS485; Modbus RTU/TCP Slave

Operating conditions

Ambient temp. range	–10 to +50 °C
Storage temperature	–20 to +60 °C
Climate class	To IEC 60654-1: Class B2
Degree of protection	Front-panel IP 65, NEMA 4; rear-panel IP 20
EMC	Interference immunity: To IEC 61326 (industrial environment) / NAMUR NE 21; Interference emissions: To IEC 61326, Class A

Mechanical construction

Weight

Panel-mounted version approx. 2.2 kg

Materials

Front frame: Zinc die cast

Housing half-panels: sheet steel;

Sight glass: Transparent Makrolon plastic

Human interface

Display	multicolored TFT display (145 mm)
Languages	German, English, Spanish, French, Italian

Data storage

Selectable save cycle	1 / 2 / 3 / 4 / 5 / 10 / 15 / 20 / 30 s; 1 / 2 / 3 / 4 / 5 / 10 / 30 min; 1h
Internal memory	128 MB
Typ. recording length memory cycle 1 min.	4 inputs: 359 weeks 12 inputs: 127 weeks
External memory	supported SD cards: 512 MB up to 32 GB