Hygienic temperature sensor with Pt100 or 4 to 20 mA output
Easytemp TMR35
Info-Hotline
+65-65668222
-
-
Hygienic process connections, surface finishing Ra ≤ 0.8 µm
-
Fast response times without reduced tip
-
Compact thermometer from stainless steel
Specs at a glance
Temperature range –50 to +200 °C (–58 to 392 °F) Accuracy <0.08 %, Pt100 class A Immersion length (diameter) 40 to 600 mm (⌀ 6 mm)
(1.6 to 23.6" (⌀ 0.24"))
Sensor response time <1.0 s (T50), <2.0 s (T90) Easytemp TMR35, compact thermometer
Product / Version Price / pcs. in SGD Order code Output; Measuring Range Process Connection 1 to 3 4 to 10 11+ 4-20mA, see additional spec. Clamp > NA Connect ISO2852 DN25-38, 1-1/2, 316L, 3-A, DIN32676 DN25-40 236.- 224.- 212.- TMR35-A1XxDBAX1AAA Clamp > NA Connect ISO2852 DN40-51, 2", 316L, 3-A, DIN32676 DN50 236.- 224.- 212.- TMR35-A1XxDLAX1AAA Clamp > NA Connect ISO2852 2-1/2, 316L, 3-A 236.- 224.- 212.- TMR35-A1XxDPAX1AAA Varivent F DN25-32, PN40, 316L, 3-A 308.- 292.- 277.- TMR35-A1XxLBAX1AAA Varivent N DN40-162, PN40, 316L, 3-A 308.- 292.- 277.- TMR35-A1XxLLAX1AAA Conical metall-metall G1/2, 316L 236.- 224.- 212.- TMR35-A1XxMBAX1AAA DIN11851 DN25 PN40, 316L, 3-A 308.- 292.- 277.- TMR35-A1XxPGAX1AAA DIN11851 DN40 PN40, 316L, 3-A 308.- 292.- 277.- TMR35-A1XxPHAX1AAA DIN11851 DN50 PN40, 316L, 3-A 308.- 292.- 277.- TMR35-A1XxPLAX1AAA Pt100, DIN class A, 4-wire Clamp > NA Connect ISO2852 DN25-38, 1-1/2, 316L, 3-A, DIN32676 DN25-40 164.- 155.- 147.- TMR35-A11xDBAX1AAA Clamp > NA Connect ISO2852 DN40-51, 2", 316L, 3-A, DIN32676 DN50 164.- 155.- 147.- TMR35-A11xDLAX1AAA Clamp > NA Connect ISO2852 2-1/2, 316L, 3-A 164.- 155.- 147.- TMR35-A11xDPAX1AAA Varivent F DN25-32, PN40, 316L, 3-A 236.- 224.- 212.- TMR35-A11xLBAX1AAA Varivent N DN40-162, PN40, 316L, 3-A 236.- 224.- 212.- TMR35-A11xLLAX1AAA Conical metall-metall G1/2, 316L 164.- 155.- 147.- TMR35-A11xMBAX1AAA DIN11851 DN50 PN40, 316L, 3-A 236.- 224.- 212.- TMR35-A11xPLAX1AAA DIN11851 DN40 PN40, 316L, 3-A 236.- 224.- 212.- TMR35-A11xPHAX1AAA DIN11851 DN25 PN40, 316L, 3-A 236.- 224.- 212.- TMR35-A11xPGAX1AAA Accessories
Product / Version Price / pcs. in SGD Order code G1/2 metal to metal weld in adapter 48.02 60021387 Weld-in adapter G3/4 d=50, 316L 45.77 71258355 Configuration kit TXU10- for PC-programmable devices. set-up programme+interface cable for PC with USB-Port. 4 pin plug+ReadWin2000+adapter M12 255.45 TXU10-BA Cable M12x1 l=5m 5m cable 4x 0.34 mm2, molded PVC angled connector, M12x1 connector screw Cu Sn/Ni, IP67. 19.27 51005148 Prices valid until 31.03.2020 in SGD per unit (not including shipping and applicable sales tax). See
Endress+Hauser Terms and ConditionsIs this temperature sensor not the perfect match for your application?
People who bought this also watched
-
-
Application
Characterized by simplicity and compact construction, the Easytemp TMR35 is available with a range of hygienic process connections. It offers good accuracy and response times and has been specifically designed for hygienic applications with 3-A certification.
Function
The compact thermometer consists of a Pt100 class A sensor, (optional) transducer and housing with hygienic process connection. The built-in electronics can be programmed using a PC and TXU10-BA configuration kit to convert the Pt100 input signal into a temperature linear 4 to 20 mA signal.
Installation instructions
Pipe installation
a) At angle sections, against the direction of flow
b) In smaller pipes, turned against the direction of flow
c) Perpendicular to the direction of flow
L = Insertion length
-
Technical data
SensorSensing element 1 × Pt100 Tolerance Class A according to IEC 751 Process temperature –50 to +200 °C Material 316L Surface finishing Ra ≤ 0.8 µm Sensor diameter 6 mm (0.24") Sensor length 40 to 600 mm selectable (please specify) Response time T50 = < 1.0 s; T90 = < 2.0 s Max. pressure 100 bar / 1500 psi (at 100 mm / 3.94" and 20 °C / 68 °F, depending on process connection) Process connectionVersion Conical metal-to-metal connection, with G½";
TRI-CLAMP® flange 1" 1½";
ISO 2852 DN 25/38;
Dairy connection DIN 11851 DN 25;
Varivent® ⌀ 68 mm for DN 32/125
Transmitter housingDegree of protection IP 66/67 Electrical connection M12×1-plug-in connector Material 304 Output characteristicsOutput signal 4 to 20 mA, 20 to 4 mA / Pt100 Signal on alarm Sensor break; Sensor short-circuit: ≤ 3.6 mA or ≥ 21.0 mA Load Max. (Upower supply –10 V)/0.023 A Ind. current requirem. ≤3.5 mA Current limitation ≤23 mA Switch-on delay 2 s Power supplySupply voltage Ub = 10 to 35 V DC Residual ripple Permitted residual ripple Uss ≤ 3 V at Ub ≥ 13 V, fmax= 1 kHz AccuracyTransmitter response time 1 s Reference operating conditions 0 °C (32 °F) (ice bath) Measuring error 0.1 K (0.18 °F) or 0.08 % Influence of supply voltage ≤ ±0.01 %/V deviation from 24 V Influence of ambient temperature (temperature drift) Td = ±(15 ppm / K × (full scale value of measuring range + 200) + 50 ppm/K × set measuring range) × Δθ
Δθ = deviation of ambient temperature from the reference operating condition
Long-term stability ≤0.1 K/year or 0.05 %/year Influence of load ≤ ±0.02 % / 100 Ω Operating conditionsAmbient temperature -40 to +85 °C (-40 to 185 °F) Storage temperature -40 to +85 °C (-40 to 185 °F) Climate class As per EN 60 654-1, Class C Shock resistance 4 g/2 to 150 Hz as per IEC 60068-2-6 EMC According to IEC 61326 Series and NAMUR NE21 Approvals3A
Dimensions (in mm)
a) TRI-CLAMP®
b) MicroClamp TriClamp
c) Dairy connection
d) G½"
e) Varivent®
f) with cap-nut G3/8"
* Version with extension neck add 35 mm (1.38")
L = selectable length from 40 to 600 mm (1.6" to 23.6")
Installation according to operation instructions
Thermowells
a) Thermowell G ½"
b) Thermowell corner piece DN15
c) Thermowell T-piece (straight) DN10
Electrical connection
4 to 20 mA
1 × Pt100
a) red
b) white
Measuring range
Code
Measuring range A
0...+100 °C B
0...+150 °C C
–50...+100 °C D
–50...+150 °C E
–50...+200 °C with extension neck
F
0...+200 °C with extension neck
X
Freely selectable (Temperature range: –50...+150 °C, please specify) -
More documents for TMR35
