- Continuous level measurement for liquids in storage tanks, open basins, pump shafts and canal systems
- Most compact radar sensor due to unique radar chip design
- Radar sensor with Bluetooth wireless technology
- Commissioning, operation and maintenance via SmartBlue app
Specs at a glance
Measuring range up to 8 m (26.25 ft) Process temperature –40 to 60 °C (–40 to 140 °F) Process pressure –1 to 3 bar (–14 to 43 psi) Maximum measured error ± 0.02 %
Product / Version Price / pcs. in ZAR Order code Antenna; Max. Measuring Range Process Connection Rear Side; Material Process Connection Front Side; Material Cable Length 1 to 3 4 to 10 11+ 40mm/1-1/2"; 5m liquid -40…60oC/-40…140oF Thread G1 ISO228; PVDF Thread ISO228 G1-1/2; PVDF 10m/32ft 7.453,- 6.707,- 6.111,- FMR10-AAQBMWDEWFE2
Product / Version Price / pcs. in ZAR Order code Mounting nut G1-1/2 Hexagon, SW60. Usage: Liquipoint T, Liquicap T, Prosonic M FMU40, Prosonic T FMU30, FMR10, FMR20. 376,08 52014146 Weather protect. cover FDU90/91,FMR10/20 Material: PVDF. Usage: FDU90/FDU91, FMR10, FMR20. 851,53 52025686 Flood.protect.tube DN40/G1 1/2" FMR10/20 Material: metallized PBT-PC. Suitable for 40mm/1-1/2" antenna with G1-1/2 front side connection. Usage: FMR10, FMR20. 844,35 71325090 Mounting bracket adjustable, 316L Usage: FDU90, FMR10, FMR20. 1.111,39 71325079
Prices valid until 30.09.2019 in ZAR per unit (not including shipping and applicable sales tax). See
Endress+Hauser Terms and Conditions
Is this Micropilot level sensor not the perfect match for your application?
Micropilot FMR10 is a sensor for continuous level measurement for liquids in storage tanks, open basins, pump shafts and canal systems.
The Micropilot is a "downward-looking" measuring system, operating based on the time-of-flight method (ToF). It measures the distance from the reference point (process connection) to the product surface. Radar impulses are emitted by an antenna, reflected off the product surface and received again by the radar system.
Max. measuring range 5 m (16 ft) with flooding protection tube 8 m (26.25 ft) Requirements of the
Tank height greater than 1.5 m (5 ft);
open channel minimum width 0.5 m (1.6 ft)
Operating frequency K-band (~ 26 GHz) Transmission power 1 m (3.3 ft) distance: < 12 nW/cm2
5 m (16 ft) distance: < 0.4 nW/cm2
Beam angle α 30°, with flooding protection tube 12°Output Output signal 4 to 20 mA Signal on alarm
Alarm current: 22.5 mA
Linearization Up to 32 value pairsElectrical connection Supply voltage 10.5 to 30 V DC 2-wire Power consumption Maximum input power: 675 mW Current consumption Maximum input current: <25 mA
Maximum start-up current: 3.6 mA
Unshielded cable, 2 × 0.75 mm2;
The cable is designed for a tensile strength of 30 N (over a period of 1 h). The sensor is supplied with 10 m (33 ft) cable length as standard.
Overvoltage protection The device is equipped with integrated overvoltage protection.Performance characteristics Reference operating conditions
– Temperature = +24 °C (+75 °F) ±5 °C (±9 °F)
– Pressure = 960 mbar abs. (14 psia) ±100 mbar (±1.45 psi)
– Humidity = 60 % ±15 %
– Reflector: metal plate with a minimum diameter of ≥ 1 m (40 in)
– No major interference reflections inside the signal beam
Sum of non-linearity, non-repeatability and hysteresis: ±5 mm (0.2 in) ±0.02 %;
Offset/Zero: ±0.03 %
Measured value resolution 1 mm (0.04 in) Influence of ambient
Zero point (4 mA): average TK = 0.02 %/10 K
Span (20 mA): average TK = 0.05 %/10 KEnvironment
–40 to +60 °C (–40 to +140 °F) Storage temperature –40 to +80 °C (–40 to +176 °F) Process temperature
–40 to +60 °C (–40 to +140 °F) Process pressure
prel = –1 to 3 bar (–14.5 to 43.5 psi)
pabs < 4 bar (58 psi)
Degree of protection
– IP66, NEMA 4X
– IP68, NEMA 6P (24 h at 1.83 m (6.00 ft) under water)
Climate class DIN EN 60068-2-38 (test Z/AD) Dielectric constant εr ≥ 4 Electromagnetic compatibility (EMC) in accordance with all of the relevant requirements outlined in the EN 61000 series and NAMUR Recommendation EMC (NE 21)Materials Sensor housing,
PVDF Seal, O-ring EPDM Counter nut PA6.6 Design ring PBT PCOperability Operating concept 4 to 20 mA; SmartBlue (app available for Android and iOS) via Bluetooth wireless technology; Menu guidance with brief explanations of the individual parameter functions in the operating toolCertificates Ex approval CSA C/US General Purpose;
Non-hazardous area, EAC conformity
Dimensions in mm
More documents for FMR10
Radar level sensor FMR10 used at BIELMLEK Spółdzielni Mleczarskiej* in Bielsk Podlaski
*BIELMLEK Spółdzielni Mleczarskiej is a dairy cooperative
• Type of liquid: flotation sludge from dairy effluents; 13-15% dry matter.
• Cylindrical underground tank with conical bottom; tank diameter: 6m, depth: 7m.
• Measuring range 5m, temperature 12-15ºC, atmospheric pressure.
Radar level sensor FMR10 at the Koczergi Bio-Power Plant / DMG sp. z o.o.
• Type of liquid: biomass effluent.
• Dimensions of the tank: 5.5 x 11 x 5m
• Measuring range: 4-20mA for 0-100%, tank capacity of about 300m3.
• Temperature: 20-40ºC, atmospheric pressure.
The situation at Bio-Power Plant is reported by Paweł Dziewulski, who works as the Operator of the Biogas Production Line - Automation Technician.
"The Micropilot FMR10 radar [level sensor] was installed in November . According to my observations and my colleagues', who operated the sensor, it is characterized by the simplicity of its two-wire electrical connection. Thanks to Bluetooth communication, we were able to connect with the sensor without any need climb on the tank and we parameterized it according to our needs (the previous device was very inconvenient to set up). The best feature of the radar FMR10 is its fast adaptability to the measured levels and to the requirements of the PLC controller without the need of any interference in the program."
DMG sp. z o. o. Bioelektrownia Koczergi
Koczergi 56B, 21-200 Parczew, Poland